United Kingdom
Cooksongold
United Kingdom · Last checked 10 November 2026
A blank means this house has not published that figure. It is not filled in from another caster, and it is not a suggestion.
- Minimum wall
- 0.8 mm advised minimum for structural and external walls.
- Minimum shank
- Not published
- Prong minimum
- 0.5 mm advised minimum for claws.
- Bezel minimum
- 0.5 mm advised minimum for small setting bezels.
- Finishing allowance
- Not published
- Preferred file
- Watertight, closed model with correct normals and manifold geometry. Maximum file size 50 MB. Designs must fit within 30 mm × 50 mm × 70 mm.
Raised text: 0.30 mm minimum thickness, no more than 0.60 mm high, 0.30 mm spacing. Recessed text: 0.30 mm minimum thickness, no more than 0.50 mm deep, 0.30 mm spacing. Holes no smaller than 0.50 mm. Sharp edges: thicken to 0.30 mm or fillet to a 0.30 mm radius. Earring posts are not printed.