United States
Santa Fe Jewelers Supply
Santa Fe, United States · Last checked 10 November 2026
A blank means this house has not published that figure. It is not filled in from another caster, and it is not a suggestion.
- Minimum wall
- 1 mm minimum wall thickness. Original models should be no less than 1 mm thick.
- Minimum shank
- Not published
- Prong minimum
- Not published
- Bezel minimum
- Not published
- Finishing allowance
- Not published
- Preferred file
- Not digital. They ask for an original model, a wax, or a mould. The same page says their casters cannot process digital designs.
Maximum piece size stated as 4 inches. Findings such as ear posts can be added after casting.